International network for natural sciences – research journal
  • mendeley icon
  • linkedin icon
  • google plus icon
  • twitter icon
  • google scholar icon
  • facebook icon

Assessment of Physico-Chemical Parameters of Sugar industry effluents

By: Muhammad Rayid, Zeeshan Ali, Anila Sikandar, Shaiza Bushra, Rafia Ali, Muhammad Zarak Khan, Mushtaq Ahmad, Sajid Aman

Key Words: Sugar industries effluents, Physico-chemical, Water pollution, Waste water management

J. Bio. Env. Sci. 11(6), 101-113, December 2017.

Certification: jbes 2017 0147 [Generate Certificate]


Sugar industries wastewater effluents are responsible for significant environmental and health problems in the absence of adequate pollution control measures. Nearly all stages of sugar production results in discharge of wastewater containing high levels of oil and suspended chemicals. In the present study, water effluents were collected from selected sugar mills in Khyber Pakhtunkhwa (KPK) and the effluent samples were examined for different physico-chemical parameters viz. pH, total suspended solids (TSS), total dissolved solids (TDS), Electrical conductivity (EC), Turbidity, Free carbon dioxide, Carbonate, Bi-carbonate, Chlorides, Total hardness, Calcium carbonate, Calcium, Magnesium, Nitrite-nitrogen, Nitrate-nitrogen, Orthophosphate, and Sulfate. The analytical data revealed that the observed values of TSS, EC, TDS and pH were higher than Pakistan’s National Environmental Quality Standards (NEQS) while other parameters turbidity, Calcium hardness, Nitrate-nitrogen, Nitrite-nitrogen, electrical conductivity, free carbon dioxide, and Sulfate concentration were found in range. The current study suggested that proper waste water monitoring and water arrangement system should be installed which not only ensure safety but also protect human health.

| Views 376 |

| Views 376 |

Assessment of Physico-Chemical Parameters of Sugar industry effluents

Abbasi T, Abbasi SA. 2010. Biomass energy and the environmental impacts associated with its production and utilization. Renewable and Sustainable Energy Reviews 14(3), 919-937,

Adekunle AS, Eniola IT. 2008. Impact of industrial effluents on quality of segment of Asariver within an industrial estate in Ilorin, Nigeria. New York Science Journal 1(1), 17-21.

Amathussalam A, MN. Abusbacker, Jayabal NJ 2002.Physico-chemical parameters and concentration of heavy metals in sugar industry. Indian Pollution Control 13, 118-119.

Azizullah A, Khattak MN, Richter P, Häder DP. 2011. Water pollution in Pakistan and its impact on public health- A review. Environment International 37(2), 479-497.

Barman SC, Sahu SK, Bhargava, Chatterjee C. 2000.Distribution of heavy metals in wheat, mustard and grown in field irrigated with industrial effluent. Bulletin of Environmental and Contamination Toxicology, 64, 489-496.

Basso LC, Basso TO, Rocha SN. 2011. Ethanol production in Brazil: the industrial process and its impact on yeast fermentation. In Biofuel production-recent developments and prospects. In Tech.

Chauhan MK, Chaudhary S, Kumar S. 2011. Life

Cycle assessment of sugar industry: A review. Renewable and Sustainable Energy Reviews 5(7), 3445-3453.

Eggleston G, Lima I. 2015. Sustainability issues and opportunities in the sugar and sugar-bioproduct industries. Sustainability 7(9), 12209-35.

ETPI. 2003. The sugar sector. Pakistan: Environmental report, Environmental Technology Program for Industry.

ETPI. 2001. Environmental Technology Program for Industry. “Environmental Report on Sugar Sector” Monthly Environmental News 5(7), 11-27.

Goel PK. 2006. Water pollution: causes, effects and control. New Age International.

Gunkel G, Kosmol J, Sobral M, Rohn H, Montenegro S, Aureliano J. 2007.Sugar cane industry as a source of water pollution-Case study on the situation in Ipojuca River, Pernambuco, Brazil. Water, Air, and Soil Pollution 180(1-4), 261-269.

Gupta VK, Jain CK, Ali I, Chandra S, Agarwal S. 2002. Removal of lindane and malathion from wastewater using bagasse fly ash—a sugar industry waste. Water Research 36(10), 2483-2490.

Gupta VK, Jain CK, Ali I, Sharma M, Saini VK. 2003. Removal of cadmium and nickel from wastewater using bagasse fly ash- A sugar industry waste. Water research 37(16), 4038-44.

Kanu I, Achi OK. 2011. Industrial effluents and their impact on water quality of receiving rivers in Nigeria. Journal of Applied Technology in Environmental Sanitation 1(1), 75-86.

Kisku GC, Barman SC, Bhargava SK. 2000. Contamination of soil and plants potentially toxic elements irrigated with mixed industrial effluent and impact in the environment. Journal of Water, Air and Soil Pollution 120,  121-137.

Macrelli S, Mogensen J, Zacchi G. 2012. Techno-economic evaluation of 2nd generation bioethanol production from sugar cane bagasse and leaves integrated with the sugar-based ethanol process. Biotechnology for biofuels 5(1), 22.

Muthusamy PS, Murugan, Manothi Smitha. 2012. Removal of nickel ion from industrial waste water using maize cob. ISCA Journal of Biological Sciences 1(2), 7-11.

Pellegrini LF, de Oliveira Junior S. 2011. Combined production of sugar, ethanol and electricity: thermo economic and environmental analysis and optimization. Energy 36(6), 3704-15.

Renó ML, delOlmo OA, Palacio JC, Lora EE, Venturini OJ. 2014. Sugarcane biorefineries: Case studies applied to the Brazilian sugar–alcohol industry. Energy Conversion and Management 86, 981-91.

Saranraj P, Stella D. 2014. Impact of sugar mill effluent to environment and bioremediation: a review. World Applied Sciences Journal 30(3), 299-316.

Muhammad Rayid, Zeeshan Ali, Anila Sikandar, Shaiza Bushra, Rafia Ali, Muhammad Zarak Khan, Mushtaq Ahmad, Sajid Aman.
Assessment of Physico-Chemical Parameters of Sugar industry effluents.
J. Bio. Env. Sci. 11(6), 101-113, December 2017.
Copyright © 2017
By Authors and International Network for
Natural Sciences (INNSPUB)
innspub logo
english language editing
    Publish Your Article
    Submit Your Article
Email Update