Fabrication of perovskite-type oxide nanopowders as a novel adsorbent in removal of Bromo Thymol Blue dye from aqueous solutions

Paper Details

Research Paper 01/04/2015
Views (246) Download (11)
current_issue_feature_image
publication_file

Fabrication of perovskite-type oxide nanopowders as a novel adsorbent in removal of Bromo Thymol Blue dye from aqueous solutions

Zohreh Zaman, Haman Tavakkoli
J. Bio. Env. Sci.6( 4), 552-561, April 2015.
Certificate: JBES 2015 [Generate Certificate]

Abstract

Nanoparticles of perovskite-type Gd0.5Ca0.5CrO3 was investigated for its ability to perform as a suitable sorbent for anionic dye from aqueous solution. The nanoperovskite were characterized using X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The effects of various experimental factors; adsorbent dose, contact time, pH and dye concentration were studied by using the batch technique. Experimental results indicate that the prepared Gd0.5Ca0.5CrO3 nanopowder can remove 91.38% of BTB dye under optimum operational conditions of a dosage of 0.02 g, pH 2, contact time of 25 min and initial dye concentration of 50mg/L. Adsorption isotherms have been modeled by Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R). The Langmuir model displayed the best fit for the isothermal data. The maximum predicted adsorption capacities were 300 mg/g for Bromo Thymol Blue (BTB) dye. The results showed that the sorption kinetics of BTB removal from aqueous solutions onto nanopowder fitted well with the pseudo-second-order model.

VIEWS 11

Adamson AW, Gast AP. 1997. Physical Chemistry of Surfaces, sixth ed., Wiley- Interscience, New York.

Afkhami A, Moosavi R. 2010. Adsorptive removal of Congo red, a carcinogenic textile dye, from aqueous solutions by magnetite nanoparticles. Journal of Hazardous Materials 174, 398–403.

Bayramoglu G, Celik G, Arica MY. 2006. Biosorption of Reactive Blue 4 dye by native and treated fungus phanerocheatechrysosporium: Batch and continuous flow system studies, B 137, 1689– 1697.

Calvete T, Lima EC, Cardoso NF, Vaghetti JCP, Dias SLP, Pavan FA. 2010. Application of carbon adsorbents prepared from the Brazilian-pine fruit shell for removal of reactive orange 16 from aquoeus solution – kinetic, equilibrium, and thermodynamic studies. Chemical Engineering Journal 91, 1695–1706.

Carbajo M, Beltran FJ, Medina F, Gimeno O, Rivas FJ. 2006. Catalytic ozonation of phenolic compounds: the case of gallic acid. Applied Catalysis B: Environmental 67, 177–186.

Dabrowski A. 2001. Adsorption—from theory to practice. Advances in Colloid and Interface Science 93, 135–224.

Dubinin MM, Radushkevich LV. 1947. The equation of the characteristic curve of the activated charcoal. Proceedings Academy Sciences USSR Physical Chemistry Section 55, 331–337.

Freundlich HMF. 1906. Over the adsorption in solution. Z Physics Chemistry A 57, 385–471.

Gunay A, Arslankaya E, Tosun I. 2007. Lead removal from aqueous solution by natural and pretreated clinoptilolite: adsorption equilibrium and kinetics. Journal of Hazardous Materials 146, 362– 371.

Hsueh CL, Lu YW, Hung CC, Huang YH, Chen CY. 2007. Removal of Orange-G and Methyl Violet dyes by adsorption onto bagasse fly ash-kinetic study and equilibrium isotherm analyses. Dyes and Pigments 75, 130–135.

Jeong H, Kim T, Kim D, Kim K. 2006. Hydrogen production by the photocatalytic over all water splitting on NiO/Sr3Ti2O7: effect of preparation method. International Journal of Hydrogen Energy 31, 1142–1146.

Jindarom C, Meeyoo V, Kitiyanan B, Rirksomboon T, Rangsunvigit P. 2007. Surface characterization and dye adsorptive capacities of char obtained from pyrolysis/gasification of sewage sludge. Chemical Engineering Journal 133, 239–246.

Kim J, Honma I. 2004. Synthesis and proton conducting properties of zirconia bridged hydrocarbon /phosphotungstic acid hybrid materials. Electrochimica Acta 49, 3179–3183.

Kundu S, Gupta AK. 2006. Arsenic adsorption onto iron oxide-coated cement (IOCC): regression analysis of equilibrium data with several isotherm models and their optimization. Chemical Engineering Journal 122, 93–106.

Kuznetsov PN, Kuznetzova LI, Zhyzhaev AM, Pashkov GL, Boldyrev VV. 2002. Ultra fast synthesis of metastable tetragonal zirconia by means of mechanochemical activation. Applied Catalysis A: General 227, 299–307.

Liu S, Qian X, Xiao J. 2007. Synthesis and characterization of La0.8Sr0.2Co0.5Fe0.5O3-δ nanopowders by microwave assisted Sol-gel route. Journal of Sol– Gel Science Technology 44, 187–193.

Merino NA, Barbero BP, Ruiz P, Cadus LE. 2006. Synthesis, characterization, catalytic activity and structural stability of LaCo1-yFeyO3±λ perovskite catalysts for combustion of ethanol and propane. Journal of Catalysis 240, 245–257.

Mishra G, Tripathy M. 1993. A critical review of the treatment for decolorization of textile effluent. Colourage 40, 35-8.

Nakamoto K. 1978. Infrared and Raman Spectra of Inorganic and Coordination Compounds. Plenum Press, New York.

Schaak RE, Mallouk TE. 2002. Perovskite by design: a toolbook of solid-state reactions. Chemistry Materials 14, 1455–1471.

Siddique M, Farooq R, Khalid A, Farooq A, Mahmood Q, Farooq U, Raja IA, Shaukat SF. 2009. Thermal-pressure-mediated hydrolysis of reactive blue 19 dye. Journal of Hazardous Materials 172, 1007–1012.

Sivaraj R, Namasivayam C, Kadirvelu K. 2001. Orange peel as an adsorbent in the removal of acid violet 17 (acid dye) from aqueous solutions. Waste Management 21, 105–110.

Tejuca LG, Fiero JLG, ed. 1993. Properties and applications of perovskite-type oxides. Marcel Dekker, New York.

Temkin MJ, Pyzhev V. 1940. Kinetics of ammonia synthesis on promoted iron catalysts. Acta Physicochimica URSS 12, 217-222.

Vijayaraghavan K, Padmesh TVN, Palanivelu K, Velan M. 2006. Biosorption of nickel (II) ions onto Sargassumwightii: application of two-parameter and three parameter isotherm models. Journal of Hazardous Materials B 133, 304–308.

Wong Y, Yu J. 1999. Laccase catalyzed decolorisation of synthetic dyes. Water Research 33, 3512-20.

Wu R, Qu J, He H, Yu Y. 2004. Removal of azo dye Acid Red B (ARB) by adsorption and catalytic combustion using magnetic CuFe2O4 powder. Applied Catalysis B: Environmental 48, 49–56.

Yazdanbakhsh M, Khosravi I, Goharshadi EK, Youssefi A. 2010. Fabrication of nanospinel ZnCr2O4 using sol–gel method and its application on removal of azo dye from aqueous solution. Journal of Hazardous Materials 184, 684–689.