Welcome to International Network for Natural Sciences | INNSpub

Coating evaluation of calcium sulfate nano particles on commercially pure titanium

Research Paper | January 1, 2019

| Download 8

Dher R. Kadhim, Thekra I. Hamad

Key Words:

Int. J. Biosci.14( 1), 194-206, January 2019

DOI: http://dx.doi.org/10.12692/ijb/14.1.194-206


IJB 2019 [Generate Certificate]


The study aim is evaluation the effect of dip coating of commercially pure titanium implant by calcium sulfate nanoparticles. Commercially pure titanium Grade (II) rods  were  machined into  circular shaped discs and were coated by nano calcium sulfate through using different binder (P2O5, PVA, PVA+PVP) the evaluation was done by using optical microscope, X-ray diffraction analysis, Atomic Force Microscope, Scanning Electron Microscope, Energy-Dispersive X-ray investigations and Vickers microhardness measurements. The most valuable results obtained by using (PVA+PVP) as binder for Cp Ti disc coated by nano calcium sulfate. Nano calcium sulfate can successfully work as coating material for titanium implant by dip coating method which increase surface Microhardness and have uniform thickness of coating layer.


Copyright © 2019
By Authors and International Network for
Natural Sciences (INNSPUB)
This article is published under the terms of the Creative
Commons Attribution Liscense 4.0

Coating evaluation of calcium sulfate nano particles on commercially pure titanium

Aksakal B, Hanyaloglu C. 2008.  Bioceramic dip-coating on Ti–6Al–4V and 316L SS implant materials. Journal of Materials Science: Materials in Medicine 19(5), 2097-2104.

Albrektsson T, Wennerberg A. 2004. Oral implant surfaces: Part 1–review focusing on topographic and chemical properties of different surfaces and in vivo responses to them. International Journal of Prosthodontics 17(5), 536-543.

Al-Hijazi AY, Al-Zubaydi TL, Mahdi EI. 2013. Histomorphometric analysis of bone deposition at Ti implant surface dip-coated with hydroxyapatite (In vivo study). Journal of Baghdad College of Dentistry 25(2), 70-75.

Al Ruhaimi KA. 2000. Effect of adding restorable calcium sulfate to grafting materials on early bone regeneration in osseous defects in rabbits. International Journal of Oral & Maxillofacial Implants 15(6), 859-864.

Bigi A, Boanini E, Bracci B, Facchini A, Panzavolta S, Segatti F, Sturba L. 2005. Nanocrystalline hydroxyapatite coatings on titanium: a new fast biomimetic method. Biomaterials 26(19), 4085-4089.

Borrelli J, Prickett WD, Ricci WM. 2003. Treatment of nonunions and osseous defects with bone graft and calcium sulfate. Clinical Orthopaedics and Related Research 411, 245-254. https://doi.org/10.1097/01.blo.0000069893.31220.6f.

Bosco R, Van Den BJ, Leeuwenburgh S, Jansen J.  2012. Surface engineering for bone implants: a trend from passive to active surfaces. Coatings 2(3), 95-119. https://doi.org/10.3390/coatings2030095

Choi JM, Kong YM, Kim S, Kim HE, Hwang CS, Lee IS. 1999. Formation and characterization of hydroxyapatite coating layer on Ti-based metal implant by electron-beam deposition. Journal of materials research 14(7), 2980-2985.

De Leonardis D, Pecora GE. 1999. Augmentation of the maxillary sinus with calcium sulfate: one-year clinical report from a prospective longitudinal study. International Journal of Oral & Maxillofacial Implants 14(6), 869-878.

Deng J, Shi Y, Jiang W, Peng Y, Lu L, Cai Y. 2008. Facile synthesis and thermoresponsive behaviors of a well-defined pyrrolidone based hydrophilic polymer. Macromolecules 41(9), 3007-3014.

Evaniew N, Tan V, Parasu N, Jurriaans E, Finlay K, Deheshi B, Ghert M. 2013. Use of a calcium sulfate–calcium phosphate synthetic bone graft composite in the surgical management of primary bone tumors. Orthopedics 36(2), e216-22.

Folttmann H, Quadir A. 2008. Polyvinylpyrrolidone (PVP)—one of the most widely used excipients in pharmaceuticals: an overview. Drug Deliver Technology 8(6), 22-27.

Hamouda IM, El-wassefy NA, Marzook HA. 2014. Micro-photographic analysis of titanium anodization to assess bio-activation. European Journal of Biotechnology and Bioscience 1(3), 17-26.

Harle J, Kim HW, Mordan N, Knowles JC, Salih V. 2006. Initial responses of human osteoblasts to sol–gel modified titanium with hydroxyapatite and titania composition. Acta Biomaterialia 2(5), 547-556.

Hsieh MF, Perng LS, Chin TS, Perng HG. 2001. Phase purity of sol– gel-derived hydroxyapatite ceramic. Biomaterials, 22, 2601–2607.

Kim HW, Koh YH, Li LH, Lee S, Kim HE. 2004. Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method. Biomaterials 25(13), 2533-2538.

Kim HM, Miyaji F, Kokubo T, Nishiguchi S, Nakamura T. 1999. Graded surface structure of bioactive titanium prepared by chemical treatment. Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials 45(2), 100-107.

Kobayashi H, Kato M, Taguchi T, Ikoma T, Miyashita H, Shimmura S, Tsubota K, Tanaka J. 2004. Collagen immobilized PVA hydrogel-hydroxyapatite composites prepared by kneading methods as a material for peripheral cuff of artificial cornea. Materials Science and Engineering: C. 24(6-8), 729-735.

Kokubo T. 2008. Bioceramics and their clinical applications. Elsevier. Woodhead Publishing.

Kozuka H, Kajimura M. 2000. Single‐Step Dip Coating of Crack‐Free BaTiO3 Films> 1 μm Thick: Effect of Poly (vinylpyrrolidone) on Critical Thickness. Journal of the American Ceramic Society, 83(5), 1056-1062.

Kumar A, Kumar V, Kumar J. 2013. Metallographic analysis of pure titanium (grade-2) surface by wire electro discharge machining (WEDM). Journal of Machinery Manufacturing and Automation 2, 1-5.

Ladd M. 2013. Structure determination by X-ray crystallography: analysis by X-rays and neutrons. Springer.

Lee BH, Do Kim Y, Shin JH, Hwan LK. 2002. Surface modification by alkali and heat treatments in titanium alloys. Journal of Biomedical Materials Research: An Official Journal of the Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials 61(3), 466-473.

Liu DM, Yang Q, Troczynski T. 2002. Sol–gel hydroxyapatite coatings on stainless steel substrates. Biomaterials, 23(3), 691-698. https://doi.org/10.1016/S0142-9612(01)00157-0

Milev A, Kannangara GS, Ben-Nissan B. 2003. Morphological stability of hydroxyapatite precursor. Materials Letters 57(13-14), 1960-1965.

Mollazadeh S, Javadpour J, Khavandi A. 2007. In situ synthesis and characterization of nano-size hydroxyapatite in poly (vinyl alcohol) matrix. Ceramics International 33(8), 1579-1583.

Palmquist A, Lindberg F, Emanuelsson L, Brånemark R, Engqvist H, Thomsen P. 2010. Biomechanical, histological, and ultrastructural analyses of laser micro‐and nano‐structured titanium alloy implants: A study in rabbit. Journal of Biomedical Materials Research Part A: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials 92(4), 1476-86.

Pecora GE, De Leonardis D, Della Rocca C, Cornelini R, Cortesini C. 1998.  Short-term healing following the use of calcium sulfate as a grafting material for sinus augmentation: a clinical report. International Journal of Oral and Maxillofacial Implants, 13(6), 866-874.

Rahman HA, Nasir M. 2016. Mechanical evaluation of pure titanium dental implants coated with a mixture of nano titanium oxide and nano hydroxyapatite. Journal of Baghdad college of dentistry 28(3), 38-43.

Rusu VM, Ng CH, Wilke M, Tiersch B, Fratzl P, Peter MG. 2005. Size-controlled hydroxyapatite nanoparticles as self-organized organic–inorganic composite materials. Biomaterials 26(26), 5414-5426.

Sandeep Kumar Kuthadi. 2014. Laboratory Scale Study of Calcium Sulfate Hydration Forms, a master thesis, Western Kentucky University, sandeepkumar.

Santillán MJ, Quaranta NE, Boccaccini AR. 2010. Titania and titania–silver nanocomposite coatings grown by electrophoretic deposition from aqueous suspensions. Surface and Coatings Technology 205(7), 2562-2571.

Shukur BN. 2016. Study different nano surface modifications on CPTi dental implant using chemical and thermal evaporation methods: Mechanical and Histological Evaluation (Doctoral dissertation, Master thesis, College of Dentistry, University of Baghdad).

Sinha A, Guha A. 2009. Biomimetic patterning of polymer hydrogels with hydroxyapatite nanoparticles. Materials Science and Engineering: C, 29(4), 1330-1333.

Su Y, Li K, Zhang L, Wang C, Zhang Y. 2018.  Effect of the hydroxyapatite particle size on the properties of sprayed coating. Surface and Coatings Technology 352, 619-626.

Tovar N, Mamidwar S, Chesnoiu-Matei J, Khanna K, Alexander H, Ricci J. 2011. Bone response to new generation nanocrystalline calcium sulfate based materials. Transaction Society of Biomaterials 164.

Yoshida M, Prasad PN. 1996. Fabrication of channel waveguides from sol-gel-processed polyvinylpyrrolidone/SiO 2 composite materials. Applied optics 35(9), 1500-1506.

Zheng M, Gu M, Jin Y, Jin G. 2000. Preparation, structure and properties of TiO2–PVP hybrid films. Materials Science and Engineering: B, 77(1), 55-59.

Zwain RZ, Hamad TI. 2018. Coating evaluation of nanocomposite mixture of TiO2 and ZrO2 by electrophoretic deposition and dip techniques on commercially pure titanium. Journal of Research in Medical and Dental Science 6(2), 483-493.