The physical properties of wood-plastic composite produced from red meranti (Shorea spp.) sawdust, polyethylene and polypropylene
Paper Details
The physical properties of wood-plastic composite produced from red meranti (Shorea spp.) sawdust, polyethylene and polypropylene
Abstract
This study aims to analyze the effect of polyethylene (HDPE) and polypropylene (PP) mixture composition on the physical properties of wood-plastic composites (WPC) with red meranti (Shorea spp.) sawdust as filler. The target of density of the wood products was 0.7 g/cm3. The ratio of sawdust and plastic was 40%:60% by adding 3% of MAH as coupling agent. The HPDE and PP ratio treatments consisted of 100% HDPE (treatment A); 75% HDPE: 25% PP (B); 50% HDPE: 50% PP (C), 25% HDPE: 75% PP (D) and 100% PP (E). The process of making composites by compression method at a temperature of 180°C, pressure of 30 bar for 20 minutes. The physical properties of WPC tested according to ASTM standards. The results showed that WPC produced had the range of density was 0.63 – 0.73 g/cm3, moisture content 26 – 3.63%, water absorption after soaking for 24 hours 15.34% – 24.15% and thickness swelling 0.94% – 3.74%. Based on ANOVA, it was found that the ratio of HDPE: PP influenced the physical properties of WPC, except for moisture content. The Density, water absorption and thickness swelling of WPC tend to increase with increasing PP content. The best mixture of HDPE and PP is a composition of 75% HDPE and 25% PP because it produces the lowest water absorption and thickness swelling values.
ASTM D 1037-12. 2012. Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Material. ASTM International. West Conshohocken, PA, United States.
ASTM D 2394-14. 2014. Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
ASTM D 4442-16. 2016. Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials. ASTM International. West Conshohocken, PA.
Barbos JDV, Azevedo JB, da Silva MCardoso P, da Costa Filho F, Gomez del Rio T. 2020. Development and characterization of WPCs produced with high amount of wood residue. Journal of Materials Research and Technology 9(5), 9684-9690. https://doi.org/10.1016/j.jmrt.2020.06.073.
Bhaskar K, Jayabalakrishnan D, Vinoth Kumar M, Sendivelan S, Prabhahar M. 2021. Analysis on mechanical properties of wood plastic composite. Material Today: Proceedings 45(7), 5886-5891. https://doi.org/10.1016/j.matpr.2020.08.570.
Clemons C. 2008. Raw materials for wood–polymer composites. In: Oksman Nisca K, Sain M, ed. Wood-Polymer Composites. Boca Raton, FL: CRC Press; Cambridge, UK: Woodhead Publishing Series in Composites Science and Engineering, 1-22. https://doi.org/10.1533/9781845694579.1.
Espert A, de las Heras LA, Karlsson S. 2005. Emission of possible odourous low molecular weight compounds in recycled biofibre/polypropylene composites monitored by head-space SPME-GC-MS. Polymer Degradation and Stability 90, 555-562. https://doi.org/10.1016/j.polymdegradstab.2005.03.009.
Félix JS, de la Cruz C, Navarrete C. 2012. Characterization of wood plastic composites made from landfill-derived plastic and sawdust: volatile compounds and olfactometric analysis. Waste Management Journal 33(3), 645-655. https://doi.org/10.1016/j.wasman.2012.11.005.
JIS A 5741:2006. 2006. Wood-Plastic Recycled Composite. Japanese Industrial Standard.
JIS A 5908:2003. 2003. Particleboards. Japanese Industrial Standard. Translated and published by Japanese Standards Association. ICS 79.060.20.
Klyosov AA. 2007. Wood-Plastic Composites. Wiley-Interscience, A John Wiley & Sons, Inc., Publication.
Rowell RM. 2005. Chemical modification of wood. CRC Press LLC. USDA, Forest Service, Forest Products Laboratory, and Department of Biological Systems Engineering, University of Wisconsin, Madison, WI. This page was uploaded by Roger M. Rowell on 01 October 2014 at: https://www.researchgate.net/publication/43286917.
Saddem M, Ahmed K, Bernard R. 2022. Properties of high-density polyethylene-polypropylene wood composites. In: Kumar B, ed. Biocomposites. IntechOpen.
SNI 03-2105-2006. 2006. Standar Nasional Indonesia. Papan Partikel. Badan Standardisasi Nasional.
Spear MJ, Eder A, Carus M. 2015. Wood polymer composites. In: Ansell MP, ed. Wood Composites. Woodhead Publishing Series in Composites Science and Engineering. Elsevier, 195-249. https://doi.org/10.1016/B978-1-78242-454-3.00010-X.
Stark NM, Cai Z, Carll C. 2010. Wood-based composite material – panel products, glued-laminated timber, structural composite lumber, and wood-nonwood composite materials. In: Forest Products Laboratory, ed. Wood Handbook-Wood as an Engineering Material. General Technical Report FPL-GTR-190. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 508p.
TAPPI T 264 cm-97. 1997. Preparation of wood for chemical analysis. Approved by the Pulp Properties Committee of The Process and Product Quality Division.
Taylor A, Yadama V, Englund KR, Harver D. 2009. Wood plastic composites – a primer. University of Tennessee of Agriculture, US. UT Extension PB1779.
Jufriah Rudianto Amirta, Wiwin Suwinarti, Irawan Wijaya Kusuma, Isna Yuniar Wardhani (2024), The physical properties of wood-plastic composite produced from red meranti (Shorea spp.) sawdust, polyethylene and polypropylene; JBES, V25, N3, September, P121-128
https://innspub.net/the-physical-properties-of-wood-plastic-composite-produced-from-red-meranti-shorea-spp-sawdust-polyethylene-and-polypropylene/
Copyright © 2024
By Authors and International
Network for Natural Sciences
(INNSPUB) https://innspub.net
This article is published under the terms of the
Creative Commons Attribution License 4.0