Synthesis and characterization of nanocomposite by using decolourization of dyes from aqueous solution

Paper Details

Research Paper 01/09/2020
Views (416) Download (25)
current_issue_feature_image
publication_file

Synthesis and characterization of nanocomposite by using decolourization of dyes from aqueous solution

Swetha V, M. Petchiammal, G. Sabeena, E. Pushpalaksmi, J. Jenson Samraj, G. Annadurai
J. Bio. Env. Sci.17( 3), 109-119, September 2020.
Certificate: JBES 2020 [Generate Certificate]

Abstract

A series of biopolymer chitosan/montmorillonite nanocomposites were prepared by controlling the molar ratio of chitosan and montmorillonite. The nanocomposites were characterized by UV, FTIR, XRD, SEM, TGA, and FL analysis were performed to confirm the observed results. Batch adsorption experiments were carried out utilizing the composite to adsorb Congo red from aqueous solutions. As a result, increasing adsorbent dosage and initial dye concentration along with decreasing agitation speed, temperature, and initial pH led to increasing the amount of adsorbed Congo red. A rapid increment in the adsorption was happened with increasing adsorbent dosage from (1.0, 2.0 and 3.0g/L), pH (3.4, 5.8 and 9.4) and temperature (30ºC, 45ºC, and 60ºC) while further increment in the adsorbent dosage resulted in an insignificant increase in the adsorption (22.0, 24.0, 29.0,mg g−1). The adsorption isotherms were also studied. It was shown that all the sorption processes were better fitted by the Langmuir and Freundlich isotherm equation. Moreover, the adsorption isotherm models were employed for the description of the Chitosan with montmorillonite nanocomposites dye adsorption processes. The antibacterial activity of Chitosan with montmorillonite nanocomposites showed more than 99% mortality against two Gram-negative bacteria and two Gram-positive bacteria. Because chitosan/montmorillonite nanocomposites could be recovered conveniently and possessed of excellent adsorptive property, it can be developed as an economical and alternative adsorbent to decolorize or treat dye wastewater.

VIEWS 27

Amidi M, Romeijn SG, Borchard G, Junginger HE; Hennink WE, Jiskoot W. 2011. Preparation and characterization of protein-loaded N-trimethyl chitosan nanoparticles as nasal delivery system. J. Control. Rel 111, 107-116,

Anthonsen MW, Smidsroed O. 1995. Hydrogen ion titration of chitosans with varying degrees of N-acetylation by monitoring induced 1H NMR chemical shift. Carbohydrate Polymers 26, 303-305.

Assaad E, Azzouz A, Nistor D, Ursu AV, Sajin T, Miron DN, Monette F, Niquette P, Hausler R. 2007. Metal removal through synergic coagulation–flocculation using an optimized chitosan-montmorillonite system, Applied Clay Science 37, 258-274.

Dutta PK, Dutta J, Tripathi VS. 2004. Chitin and chitosan: Chemistry, properties and applications. Journal of Scientific and Industrial Research 63, 20-31.

Goy RC, Britto D, Assis OBG. 2009. A review of the antimicrobial activity of chitosan. Polímeros 19(3), 241-247.

Guibal E. 2007. Interactions of metal ions with chitosan-based sorbents. A review. Separation and Purification Technology 38, 43-74.

Harrison W, Erastus G, Paul K, Zhiyong T, Yan G. 2011. Synthesis silica nanoparticles with tunable physical properties by varying molar composition of reagents. Academic Journals 2, 7-14.

Jaroniec M. 1975. Adsorption on heterogeneous surfaces: The exponential equation for the overall adsorption isotherm. Surface Science 50(2), 553-564.

Jones N, Ray B, Ranjit KT, Manna AC. 2008. Antibacterial activity of ZnO nanoparticle suspensions on a broad spectrum of microorganisms. FENS Microbial Lett 279, 71-76.

Katrin E, Sima S, Hossein M. 2017. Biosynthesis of copper nanoparticles using aqueous extract of Capparis spinosa fruit and investigation of its antibacterial activity. Marmara Pharmaceutical Journal 21(4), 866-871.

Khedr MA, Waly AI, Hafez AAH. 2012. Synthesis of modified chitosan-montmorillonite nanocomposite. Aus. J. Basic App. Sci 6, 216-226.

Kittinaovarat S. Kansomwan P. Jiratumnukul N. 2010. Chitosan/modified montmorillonite beads and adsorption Reactive Red 120. Applied Clay Science 48, 87-91.

Klug M, Sanches MN, Laranjeiramc, Favere VT, Rodrigues CA. 1998. Análise das isotermas de adsorção de Cu(II), Cd(II), Ni(II) e Zn(II) pela N-(3, 4-dihidroxibenzil) quitosanaempregando o metodo da regressãonão linear. Quimica Nova 21, 410-413.

Kurita K. 2006. Chitin and chitosan: Functional biopolymers from marine crustaceans. Marine Biotechnology 8, 203-226.

Langmuir IJ. 1918. The adsorption of gases on plane surface of glass, mica and platinum. J. Chem. Soc. 40, 1361-1364.

Lin Z, Jienan C, Wenji YU. 2018. Qingfeng Zhao and Jin Liu Antimicrobial Nanocomposites Prepared from Montmorillonite/Ag+/Quaternary Ammonium Nitrate. Journal of Nanomaterials 7, 1-7.

Noorsaiyyidah D, Mohd R. 2012. Johan Complex Impedance Spectroscopy Study of Silica Nanoparticles Via Sol-Gel Method. International Journal of Electrochemical Science 7, 5604-5615.

Prokop A, Kozlov E, Newman GW, Newman MJ. 2018. Water- based nanoparticulate polymeric system for protein delivery: permeability control and vaccine application. Biotechnology. Bioeng 78, 459-466.

Reda Hassanien Dalal Z, Husein Mostafa F, Al-Hakkani A. 2018. Biosynthesis of copper nanoparticles using aqueous Tilia extract: antimicrobial and anticancer activities. Heliyon 4(1), 7-7.

Shiravand S, Azarbani E. 2017. Phytosynthesis, characterization, antibacterial and cytotoxic effects of copper nanoparticles. Green Chem. Lett. Re 10, 241-249.

Sridhari TR, Dutta PK. 2000. Synthesis and characterization of maleilated chitosan for dye house effluent. Indian J Chem Tech 7, 198-204.

Wang L, Wang A. 2007. Adsorption characteristics of Congo Red onto the chitosan/montmorillonite nanocomposite. Journal of Hazardous Materials   147, 979-985.

Wang X, Du Y, Luo J. 2008. Biopolymer/montmorillonite nanocomposite: preparation, drug-controlled release property and cytotoxicity. Nanotechnology 19, 19-22.

Xia M, Jiang Y, Zhao I, Li F, Xue B, Sun M, Liu D, Zhang X. 2010. Wet grinding of montmorillonite and its effect on the properties of mesoporous montmorillonite. Colloids and Surfaces A: Physicochemical and Engineering Aspects 356, 1-9.

Zhu S, Chen J, Zuo Y, Li Y. 2011. Cao, Montmorillonite/polypropylene nanocomposites: Mechanical properties, crystallization and rheological behaviors. Applied Clay Science 52, 171-178.