Potential utilization of reinforced mortar and dissolved high-density polyethylene (HDPE) plastic waste with used cooking oil as floor tiles: An eco-friendly approach to alternative building material
Paper Details
Potential utilization of reinforced mortar and dissolved high-density polyethylene (HDPE) plastic waste with used cooking oil as floor tiles: An eco-friendly approach to alternative building material
Abstract
The world is currently confronting a pressing environmental challenge: solid waste management. Among various waste types, plastic particularly high-density polyethylene (HDPE), is of major concern due to its resistance to degradation, often persisting for hundreds or even thousands of years. This accumulation poses significant threats to ecosystems and human health. Recycling presents a viable, sustainable solution. The primary objective of this research is to tackle the issue of plastic waste by developing a practical product that reduces the reliance on mined raw materials in construction. Specifically, the goal was to develop reinforced mortar with Galvanized Wire Mesh (GWM) tiles suitable for construction by incorporating High-Density Polyethylene (HDPE) plastic waste and Waste Cooking Oil (WCO). This study sought to evaluate the feasibility of the experimental product by assessing its physical (water absorption and breaking strength and modulus of rupture), mechanical (surface quality), and chemical (stain resistance) properties prescribed by ISO-13006/EN176 standards. Each of the treatments (1, 2, and 3) exhibited positive results in water absorption with the standard of >10%, breaking strength of >600N, modulus of rupture of >35N/mm2 and stain resistance test minimum of class 3. Unfortunately fail to surface quality test due to volumetric shrinkage of the plastic material. The results indicated that Treatment 2 and 3, having treatment ratios of 5.0% WCO, 45.0% HDPE plastic waste, 2.5% GWM, 47.5% mortar, and 10.0% WCO, 40.0% HDPE plastic waste, 2.5% GWM, 47.5% mortar, respectively, where higher proportions of waste cooking oil were utilized, align with the observed improvements in homogeneity and compactness of the samples. Additionally, there doesn’t appear to be a significant difference in the results for each treatment across these different testing characteristics, suggesting that each treatment offered environmental benefits while also presenting a cost-effective option. Further research and development are essential to optimize the performance and suitability of plastic tile materials for broader applications.
Adesina PA, Dahunsi BI. 2020. Blended waste utilization in road construction: physical characteristics of bitumen modified with waste cooking oil and high-density polyethylene. International Journal of Pavement Research and Technology 14(1), 98–104.
Aho IM, Ndububa EE. 2015. Compressive and flexural strength of cement mortar stabilized with raffia palm fruit peel (RPEP). Global Journal of Engineering Research 14, 1–7.
American National Standards Institute (ANSI). n.d. ASTM ceramic tile testing standards referenced in ANSI A137.1. ANSI Blog. https://blog.ansi.org/astm-ceramic-tile-testing-standards-ansi-a137-1/?amp=1.
American Society for Testing and Materials (ASTM). 2004. Standard test method for flexural strength of ceramic whitewares by three-point loading. ASTM C648-04. West Conshohocken, PA: ASTM.
American Society for Testing and Materials (ASTM). 2023. Standard test method for compressive properties of rigid plastics in edgewise. ASTM D695-23. West Conshohocken, PA: ASTM.
American Society for Testing and Materials (ASTM). 2023. Standard test method for tensile properties of plastics. ASTM D638-23. West Conshohocken, PA: ASTM.
Azahar WN, Bujang M, Jaya RP, Hainin MR, Mohamed A, Ngad N, Jayanti DS. 2016. The potential of waste cooking oil as bio-asphalt for alternative binder: An overview. Jurnal Teknologi 78(4), 11–16.
Borhan MM. 2011. Laboratory study of water absorption of modified mortar. Journal of Civil Engineering, Science and Technology 2(1), 25–30.
Forquin P. 2024. Dynamic behavior of ceramic materials. In Dynamic Behavior of Materials, pp. 449–482. Elsevier.
Hopewell J, Dvorak R, Kosior E. 2009. Plastics recycling: challenges and opportunities. Philosophical Transactions of the Royal Society B: Biological Sciences 364(1526), 2115–2126.
International Organization for Standardization (ISO). 2008. Plastics—Determination of water absorption. ISO 62:2008. Geneva: ISO.
International Organization for Standardization (ISO). Ceramic tiles- Part 2: Dimensional and surface quality (ISO 10545-2).
International Organization for Standardization (ISO). Ceramic tiles- Part 3: Determination of flexural strength (ISO 10545-3).
International Organization for Standardization (ISO). Ceramic tiles- Part 4: Modulus of rupture (ISO 10545-4).
International Organization for Standardization (ISO). Ceramic tiles- Part 14: Resistance to stain (ISO 10545-14).
International Organization for Standardization (ISO). N.D. ISO 13006. Ceramic tiles- Definitions, classification, characteristics and marking. Geneva: ISO.
Kruse Training. 2017. SEA-LECT Plastic. Polymer shrinkage [PDF]. Retrieved from https://krusetraining.com/wp-content/uploads/2017/10/Polymer-Shrinkage.pdf.
MatWeb LLC. 2014. Overview of materials for high density polyethylene (HDPE), extruded, 0-3.
Office of the City Environment and Natural Resources (OCENR). 2023. Annual report. Zamboanga City: OCENR.
Philippine National Standards (PNS). ISO 13006:2019: Ceramic tiles Definitions, classification, characteristics and marking.
Ritchie H, Samborska V, Roser M. 2023. Plastic pollution. Our World in Data.
Sangroniz A, Zhu JB, Tang X, Etxeberria A, Chen EY, Sardon H. 2019. Packaging materials with desired mechanical and barrier properties and full chemical recyclability. Nature Communications 10(1), 3559.
Schachter J, Karasik R. 2022. Plastic pollution policy country profile: Philippines. NI PB 22-10. Durham, NC: Duke University.
Swan M. (n.d.). Shrinkage and warpage [PDF]. Marcia Swan. https://marciaswan.weebly.com/uploads/1/3/5/8/13585698/mfdg_low-res_proof_part2.pdf, p. 177.
U.S. Environmental Protection Agency (US EPA). 2017. Containers and packaging: Product-specific data. Retrieved from https://www.epa.gov/facts-and-figures-about-materials-waste-and-recycling/containers-and-packaging-product-specific.
World Wide Fund for Nature (WWF). 2020. Extended producer responsibility (EPR) scheme assessment. Retrieved from https://wwfph.awsassets.panda.org/downloads/epr-scheme-assessment-for-plastic-packaging-waste-in-the-philippines-report.pdf.
Rheanie R. Arnuco, Rosanilio M. Yagos (2024), Potential utilization of reinforced mortar and dissolved high-density polyethylene (HDPE) plastic waste with used cooking oil as floor tiles: An eco-friendly approach to alternative building material; JBES, V25, N6, December, P117-128
https://innspub.net/potential-utilization-of-reinforced-mortar-and-dissolved-high-density-polyethylene-hdpe-plastic-waste-with-used-cooking-oil-as-floor-tiles-an-eco-friendly-approach-to-alternative-building-material/
Copyright © 2024
By Authors and International
Network for Natural Sciences
(INNSPUB) https://innspub.net
This article is published under the terms of the
Creative Commons Attribution License 4.0